Basic
The KHBS Module is automatically detected and configured when connected the first time.
The configuration can be changed via Control UI:
http://noreya-nexus.local/nexuscontrolui/network/khbs
The openHAB bridge is automatically added.
Label description
| Label | Led On | LED off | LED blinking |
|---|---|---|---|
| BACT | Bus online | no transfer | Bus data transfer ongoing |
| TEMP | Temperature limit reached | Temperature ok | |
| BUSV | Bus voltage ok | Bus voltage too low | |
| VCC | TPUART VCC ok | ||
| VDP | TPUART VDP ok | ||
| UTX | USB/UART sending | ||
| URX | USB/UART receiving | ||
| UVCC | USB/UART VCC ok |